Oxalika PRO Sprint Cordless Oxalic Acid Sublimator

• Oxalika PRO Sprint Cordless Sublimator is perfect to apiaries of up to and beyond 500 hives.
• Includes adaptors of for use with the lithium-ion batteries listed beow. (batteries; not supplied).
• Quality Italian product - CE and Rohs Euro Certified quality

Best used with pure oxalic acid (99.8%) which leaves no residue in sublimator. 

It heats up in just 2 minutes and is ready for sublimation.  The number of treatments you can do with a battery depends on the capacity of the battery. With a 5Ah battery, about 40 x 2-gram treatments can be made if the sublimator is cold and about 50 if it is already hot.

It also works with low-capacity batteries (minimum 2Ah), allowing for 7–10 treatments with 2 grams of oxalic acid on a single heating cycle. With 5Ah batteries, it can perform approximately 50 cold starts or 60 warm starts.

SPRINT model (with spring plunger): ithis model has a rapid dosing system consisting of an adjustable spring plunger. The adjustment allows the dose to be set from 1 to 4 grams by simply turning the knob.

At the end of the treatment, the plunger is pulled out, pressed onto the oxalic acid powder and inserted into the seat, and the knob is pressed on. The acid falls off and sublimation begins. If you treat with 2 grams of oxalic acid, after 25 seconds you repeat the cycle.

Battery protection: Both models have a built-in system that turns off the sublimator when it detects that the battery is low by protecting it from overdischarge (an overdischarged battery cannot be recharged and becomes unusable). An indicator light will indicate the status of the battery: it will be lit green if the battery is charged and will turn red when the battery is almost completely discharged and the device is about to turn off.

Available with adapters that allow the use of various brands of 18-volt LiIon batteries. Ask us if you need an adapter that is not present.

Interchangeable tube: in just a few steps you can replace the diffuser tube, choosing the one that best suits your treatment. With the “S” curved tube you will be able to easily deal from the flight hatch. Instead, with the 90-degree curved tube you will be able to treat from above using the hole for the feeder. With the straight tube you can treat the hives by drilling a hole in the back side of the hive or the back side of the inverted inner cover. The tubes are made of high-strength copper and are all included with the sublimator.

Anchor bracket: the anchor bracket is included and improves the stability of the sublimator in treatments from the flight opening.

Anticorodal aluminum boiler with internally accessible and unobstructed sublimation chamber (patent pending).

Aluminum ensures more even temperature distribution without the formation of “hot spots” and “cold spots.” The accessible sublimation chamber allows for thorough cleaning necessary to keep the sublimator efficient after many uses.

Insulated boiler

Makes the device insensitive to low ambient temperatures and the presence of wind and contributes to battery saving.