Oxalika PRO Smart Oxalic Acid Vaporiser

• Oxalika PRO Smart Cordless Sublimator is perfect to apiaries of up to and beyond 500 hives.
• Includes adaptors of for use with the lithium-ion batteries listed beow. (batteries; not supplied).
• Quality Italian product - CE and Rohs Euro Certified quality

Best used with pure oxalic acid (99.8%) which leaves no residue in sublimator. 

It heats up in just 2 minutes and is ready for sublimation.  The number of treatments you can do with a battery depends on the capacity of the battery. With a 5Ah battery, about 40 x 2-gram treatments can be made if the sublimator is cold and about 50 if it is already hot.

It also works with low-capacity batteries (minimum 2Ah), allowing for 7–10 treatments with 2 grams of oxalic acid on a single heating cycle. With 5Ah batteries, it can perform approximately 50 cold starts or 60 warm starts.

This PRO Smart model icorporates the Sprint's Spring Plunger PLUS a Smart Valve): It is the easiest to use and best performing model. The Spring Plunger remains cold; you use it only to insert the dose on the appropriate cavity located at the top of the Smart valve. This can be done during sublimation, thus without losing time between sublimations.

The PRO Smart imodel has a rapid dosing system consisting of an adjustable spring plunger. The adjustment allows the dose to be set from 1 to 4 grams by simply turning the knob.

Battery protection: Both models have a built-in system that turns off the sublimator when it detects that the battery is low by protecting it from overdischarge (an overdischarged battery cannot be recharged and becomes unusable). An indicator light will indicate the status of the battery: it will be lit green if the battery is charged and will turn red when the battery is almost completely discharged and the device is about to turn off.

Available with adapters that allow the use of various brands of 18-volt LiIon batteries. Ask us if you need an adapter that is not present.

Interchangeable tube: in just a few steps you can replace the diffuser tube, choosing the one that best suits your treatment. With the “S” curved tube you will be able to easily deal from the flight hatch. Instead, with the 90-degree curved tube you will be able to treat from above using the hole for the feeder. With the straight tube you can treat the hives by drilling a hole in the back side of the hive or the back side of the inverted inner cover. The tubes are made of high-strength copper and are all included with the sublimator.

Anchor bracket: the anchor bracket is included and improves the stability of the sublimator in treatments from the flight opening.

Anticorodal aluminum boiler with internally accessible and unobstructed sublimation chamber (patent pending).

Aluminum ensures more even temperature distribution without the formation of “hot spots” and “cold spots.” The accessible sublimation chamber allows for thorough cleaning necessary to keep the sublimator efficient after many uses.

Insulated boiler

Makes the device insensitive to low ambient temperatures and the presence of wind and contributes to battery saving.